Glueless Laminate Flooring DIY Installation Instructions

1.

Install vapor barrier (0.2 mm PE film) and underlay

2.

Lay panels close together on floor

3.

Lock in half-length panel with rotating motion

4.

Observe clearances

5.

Dock in panel lengthwise

6.

Link panels transversely

7.

Continue in stepped fashion

8.

Rotate offcut section through 180° and mark accordingly

9.

Shorten last panel, rotate through 180° and slot in

10.

Fit panel using drawbar

11.

Start the next row with the leftover section (min.40cm)

12.

Cut last row to size

13.

Allow for expansion

14.

Ensure floor is able to "float"

15.

Expansion joints

16.

Done!